RPS 2.4 Release Bearing and Adapter

RPS 2.4" Release Bearing and Adapter

RPS 2.4 Release Bearing and Adapter.

RPS 2.4 Release Bearing and Adapter.

RPS Release Bearing and Adapter CTSV applications. 2.40" tall. Designed to be used on the stock CTSV Slave Cylinder for proper stack height. This rps piston/bearing adapter is to be used with any of the RPS Clutch Kits making up for the needed stack height replacement when removing the factory dual mass flywheel. in past model manufacturers had you shim out the slave cylinder to make up the stack height difference but on several of the late madel GM applications you can no longer shim behind the slave cylinder. RPS has designed this adapter with the larger bearging for proper fitment with the RPS Kits. The adapter can be trimmed on the bottom side to shorten it if need be to establish the proper air gap of .300-.350 required when using stock slave cylinders with the RPS clutch kits.